*As an Amazon Associate, this site earns from qualifying purchases. Learn More

Best Reciprocating Saws in 2022

A reciprocating saw is just the right tool for the job when we need to make quick cuts in construction materials such as metal, wood, and plastic. When precision or accuracy is not essential for the work. These saws are highly effective and can be used to cut a wide variety of materials.

In addition, one of their strongest advantages is that they can get into tight workspaces where most power tools can’t. In the past, manually operated hand saws were used to make cuts in construction tasks, which were moved to and from by hand while cutting.

However, the process of cutting through metal is time-consuming, as it requires a lot of energy to shave through such hard materials. But there was a paradigm shift when the reciprocating saw was invented and Sawzall is another name for it.

The reciprocating saws are most commonly used to chop up the branches and cut copper pipes, plastic pipes, floorboards, and holes in plasterboards. Not only this, these tools offer a unique combination of versatility and utility.

Table of Contents

#PreviewProductRating
1Milwaukee Super Sawzall⭐⭐⭐⭐⭐
2DeWALT DCS367P1 Reciprocating Saw⭐⭐⭐⭐
3 DeWALT XTREME DCS312G1 Reciprocating Saw⭐⭐⭐
BEST CHOICE
Milwaukee Super Sawzall
⭐⭐⭐⭐⭐
PREMIUM PICK
DeWALT DCS367P1 Reciprocating Saw
⭐⭐⭐⭐
BEST VALUE
DeWALT XTREME DCS312G1 Reciprocating Saw
⭐⭐⭐

1.1. What You Need to Know Before Buying a Reciprocating Saw

Cordless reciprocating saws are less precise than corded reciprocating saws, specifically. Blades on these saws are somewhat thin and long, and they are attached to the saw at only one end, but they are incredibly powerful.

In the same way that a handsaw bends and bows as it moves back and forth, the saw blade bends and bows as it moves at great speeds. Therefore, stably cutting lumber on a stack can, for example, be challenging. 

Circular or miter saws are the best choice if you need a saw that makes accurate cuts as they have been designed to cut at specific angles consistently and repeatedly. Nevertheless, when it comes to any other project, even on the go, a reciprocating saw is a great choice thanks to its efficiency, functionality, and small size.

1.2. How to Choose the Best Cordless Reciprocating Saw

It is important to have a good cordless reciprocating saw, such that you can quickly cut wood that otherwise would take a while to cut. It is important, however, to think about certain factors when purchasing these tools. This segment describes these factors in detail.

1.3. Standard Versus Compact

In the beginning, reciprocating saws were only available in large and two-handed models. The number of small and hand-held models has increased since then, and hobbyists get to choose from many options.

Standard cordless reciprocating saws:

These two-handed reciprocating saws offer plenty of power and portability. Their length is usually almost 2 feet and their weight is about 10 pounds. Their constant movement is a bit daunting, but they offer great control.

Compact and one-handed designs:

As shown by the names, these saws are compact and easier to use. Their lightweight makes them suitable for light-duty work. A compact model can deliver the same level of power as a standard model, but it is still necessary to use two hands for safe operation. Users can easily operate one-handed models with one hand alone, but they aren’t as powerful and efficient.

1.4. The Orbital Action

Reciprocating saws gnaw through materials with repeated strokes. Cutting occurs when the blade moves backward, and resetting occurs when it moves forward. In most cases, this will suffice, though, if the material is softer, such as lumber, orbital action might be a better option.

The blade path is more circular when using reciprocating saws with orbital action. As the blade moves backward when it is back striking, the blade goes downward as well.

However, the blade travels upwards as it moves forward. Cutting soft material with a circular motion is faster than cutting metal, but produces a lot of chatter when cutting other materials like pine, cedar, and redwood. Cordless reciprocating saws can feature rotational action, but it is not a common feature.

1.5. Speed Variability

A corded reciprocating saw of the earliest models featured two options: on and off. However, speeds could not be controlled in any way. In addition to being dangerous, the act can also wear out the blades faster and make control more difficult.

Thanks to cordless technology, they can be varied in speed now. In most cases, cordless reciprocating saws feature variable speeds that let you throttle the blade speed from just a few iterations per minute up to full power, which can exceed 2.000 to 2,500 strokes per minute.

Users can set a variable speed and use the blade as precisely as possible, thus extending the battery and blade’s life.

1.6. Comfort

Recent innovations in reciprocating saw design have been focused on ergonomics, both for corded and cordless models.

Though the original reciprocating saws have been quite popular and are good at working, there will come a day when a professional or a DIYer will use the reciprocating saw for several hours, and there will be a failure of their traditional grip and designs.

The ergonomic models enable the user to adjust the saw’s holding position based on the angle from which the saw is being held. As opposed to using a preset grip or a compromised position, users can comfortably adjust the handle to meet their comfort and needs.

Furthermore, the use of rubber grips to control vibration is becoming more popular with these saws as well. Vibration associated with sawing at high speeds is reduced by the grips, keeping the user’s arms, hands, and shoulders comfortable.

1.7. Blade Type and Stroke

The blades of reciprocating saws (corded and cordless) can be swapped out. Each has a particular purpose and blade for which it’s best suited.

Metal Blades

Each stroke of a metal blade removes small pieces of metal with the help of fine teeth. Specifically, they are used to cut steel pipes, angle iron, and other materials that can be cut with them.

Combination Blades

Metal and wood can be cut using combination blades. A primary purpose of these blades is to slice through wood, but they might also slice through nails embedded in the material during their use.

Wooden Blades

Unlike most other blades, wood blades have huge, sharp teeth that can quickly cut through wood. Using them to cut through wood is ideal if it’s free of nails, and they’re also perfect for cutting through the backyard.

1.8. Longevity of the battery

Reciprocal saws do not have any set rules for battery life. Remember, however, that the battery will last longer for a given saw if its amp-hour rating is larger. To nail down the exact length of time it will work, you need to take into account several factors, such as:

  1. Material
  2. Battery amp-hour rating
  3. Sawing speed
  4. Blade used

Battery life will typically be longer with cordless reciprocating saws with brushless motors, assuming everything else is equal. An electric brushless model is the best choice when battery life is concerned. For every model, you should always purchase an additional battery. 

Our Top 3 Products

1.9. Milwaukee Super Sawzall

This super Sawzall comes with power and is a durable product. This corded reciprocating saw by Milwaukee comes with an integral clutch mechanism that controls gear wear by absorbing forces related to blade locking, a powerful 15-amp motor that is equipped with an overload protection mechanism to prevent failure/burnout, and an anti-vibration mechanism with a counterbalance. Moreover, blade changes are extremely easy with the Quick-Lock feature.

You can also control and change the speed with an adjustable trigger and a dial that controls speed. All these features allow this Super Sawzall to get the word done efficiently and effectively. This is the reason that it is our top product.

1.10. DeWALT DCS367P1 Reciprocating Saw

There are multiple cutting positions on this Dewalt model, which is durable, powerful, and easy to adjust the blade. It can get into tight areas and cut the material flush to a wall or make clean cuts of branches.

The fast blade change feature makes it ideal for users who work with a wide range of materials. The 20-volt lithium battery will be able to cut thick branches or heavy metals for over 30 minutes.

Additionally, there are few vibrations with the Dewalt and it doesn’t bounce around when cutting hard materials. It’s LED light system and ergonomic design makes it one of the top choices among users.

1.11. DeWALT XTREME DCS312G1 Reciprocating Saw

For a reasonable price, this is the best one-handed saw you can get, and it’s perfect for people who don’t have a specific task in mind but are frequently cutting with a saw. For trimming and chopping down large branches at any time, it can be a useful tool no matter what you’re working on. Working under sinks or in confined spaces could not be easier thanks to the powerful LED light. In addition to providing good grip, the rubbery casing makes the tool more durable. 

1.12. Milwaukee Super Sawzall

When power is needed, a corded saw is extremely useful. This super Sawzall comes with power and is a durable product.

This corded reciprocating saw by Milwaukee comes with an integral clutch mechanism that controls gear wear by absorbing forces related to blade locking, a powerful 15-amp motor that is equipped with an overload protection mechanism to prevent failure/burnout, and an anti-vibration mechanism with a counterbalance.

Moreover, blade changes are extremely easy with the Quick-Lock feature. You can also control and change the speed with an adjustable trigger and a dial that controls speed.

Constant power is its most valuable feature. You can keep your blade moving efficiently when loaded, which avoids bogging down under stress. You can count on this Super Sawzall to handle any reciprocating saw job efficiently. The experience will not disappoint you.

Pros

  • The brushless motor
  • Sturdy and reliable
  • The orbital switch

Cons

  • Unlike most options, it is more costly
  • Some users may find it too heavy

1.13. DeWALT DCS367P1 Reciprocating Saw

This Dewalt offers durability and power in abundance and can adjust the blade to a variety of cutting positions. It can get into tight areas and cut the material flush to a wall or make clean cuts of branches.

It can easily handle metal and thick, tough branches, and will be able to handle most materials. Users working on a wide range of materials benefit from its fast blade change feature. 

The blade brake mechanism stops the saw blade from getting stuck on work surfaces.Snagging is quite advantageous. Snagging is one of the major problems with these kinds of tools. Having to continuously free the blade from the trapped material can quickly become tedious.

For heavy duty cutting work such as metal and thick branches the 20v lithium battery provides at least 30 minutes of cutting. If you do lighter cutting tasks with it, you can use it for hours. If you plan to cut tough materials all day, an amp-hour battery can also be purchased separately.

It is well balanced and ergonomic so you can use it for a long time without any problems. Additionally, there are few vibrations with the Dewalt and it doesn’t bounce around when cutting hard materials.

Pros

  • Light source: an LED
  • Clamping system with four positions
  • A non-slip grip

Cons

  • It is hard to protect kit with soft-sided bags
  • Costly

1.14. DeWALT XTREME DCS312G1 Reciprocating Saw

The very best one-handed saw you can find for a reasonable price, the 12-volt model is perfect for people who don’t necessarily have a particular purpose in mind, but frequently need to cut with a saw for several purposes.

No matter what kind of project you’re working on, it can be a useful tool you can use at any time for trimming and chopping down large branches. Working under sinks or in confined spaces could not be easier thanks to the powerful LED light.

The tool is encased in a rubbery casing that aids in gripping and strengthens its overall durability.  

Pros

  • Money-back guarantee for 90 days
  • Two blades are included
  • An electric brushless motor

Cons

  • Designed for small demolition projects, not for large demolition jobs
  • Compared to most other options, it has less power

1.15. Milwaukee M18 Hackzall Reciprocating Saw

Compact and convenient to use with one hand, this saw is ideal for making quick and accurate cuts. You might not think it could handle heavy-duty materials like Unistrut or sheet metal due to its size, but its 18-volt motor is extremely powerful. 

As it only measures 11 inches long, it can easily fit into a backpack or toolbox, allowing you to quickly and easily use it.

Because of its size, this saw can also be used to reach areas that are difficult to access when working on plumbing or irrigation systems.

Pros

  • Reduced vibration due to a shorter blade stroke
  • 5.0 Ah large capacity battery included

Cons

  • Does not provide as much leverage as a two-handed model

1.16. Milwaukee 6538-21 Reciprocating Saw

This Milwaukee reciprocating saw has a 15 Amp motor. Milwaukee calls it the Super Sawzall, and that’s not just a fancy name, as this saw really is a super saw. Beastly, huge, and powerful, it’s an enormous tool.

There is nothing it can’t chop through on a construction site. With this saw, the blade is constantly powered so it provides constant performance during cuts.

Because reciprocating saws with as much power as this tend to vibrate when used, Milwaukee developed a patented counterbalanced mechanism that reduces vibration, making certain that the saw runs smoothly as it cuts.

Milwaukee’s Super Sawzall reciprocating saw boasts an adjustable stroke speed from 0 to 2800 rpm, making it among the most productive reciprocating saws on the market today.

Pros

  • Vibration is reduced by counterbalancing
  • An orbital setting

Cons

  • Not as mobile as battery-operated models

1.17. Makita 11 Amp JR3050T Reciprocating Saw

You can use the JR3050T reciprocating saw from Makita for both professional work and do-it-yourself work around the house. It is a very versatile, user-friendly saw.

This tool has an 11 amp motor, which gives you sufficient power to tackle the toughest projects. Featuring speed levels of 0 to 2800 SPM and a stroke length of 1-1/8 inches, this saw runs fast and smooth.

Moreover, you can control and adjust the stroke speed with a two-finger variable speed trigger according to your application. Designed by Makita, this saw is lightweight at 7.3 pounds, which makes it easy to use for long periods without causing too much fatigue, particularly for cutting overhead without feeling overly tired.

Finally, there is an integrated dust blower for removing the dust that is generated during the cutting process, resulting in a clearer line of sight as well as improved accuracy.

Pros

  • It can produce 2800 strokes per minute
  • The rafter hook is included

Cons

  • Bulky in size
  • There is no orbital setting

1.18. BOSCH 12-Volt Max Pocket Reciprocating Saw

This cordless saw differs from the other ones in that it is small and compact, but packs a big punch. It is also extremely capable.

No matter how tough the material is, even with its lightweight nature, it is ideal for cutting smaller objects. Powered by small batteries, this compact tool has a small silhouette, along with a level gauge that indicates battery life.

Also, the blade brake lessens the chance that the blade will catch in the material, a problem that often plagues saw users. However, in terms of durability, the flimsy charger cord is the biggest downside to this kit.

Pros

  • Two blades are included
  • The grip is comfortable and soft

Cons

  • Insufficient power to handle intense woodcutting jobs

1.19. Makita 12 Amp JR3051T Reciprocating Saw

This midsized reciprocating saw is a great choice for beginners who need a reciprocating saw for the first time. A wide range of tasks can be handled effectively with two different blades – one for wood, one for metal. 

Moreover, this model costs significantly less than models that can cost hundreds more.

There is, however, a good reason for its low price: It does not come with a carrying case, which is a significant inconvenience if you intend to transport your saw frequently, or just want to store it neatly.

Pros

  • The machine can perform 3000 strokes per minute
  • Contains a rafter hook

Cons

  • It's a bit bulky
  • An orbital setting is not available

1.20. BLACK+DECKER BDCR20C 20V Max Reciprocating Saw

This reciprocating saw is significantly less expensive than some of the other models listed here, making it a great option for casual hobbyists not looking to spend too much on a higher-end model.

The 20 volt motor can match the power and performance of larger tools, however, the 1.5 Ah battery operates much shorter than those of the 3.0 and 5.0 models. 

By locking the trigger switch, this is a particularly safe option to use, as it prevents accidently active triggers. In addition, the pivoting shoe gives you the ability to spin the blade as you cut, allowing you to maintain contact with the object you are slicing.

Pros

  • Weighs little
  • Rubber grip with extended length
  • Compact design with 150W RMS power

Cons

  • No orbital setting
  • Limitation of runtime

FAQ

Q: What is the best reciprocating saw to buy?

A: Milwaukee Super Sawzall is the best reciprocating saw to buy.

Q: Which cordless reciprocating saw is the best?

A. Milwaukee Super Sawzall is the best cordless reciprocating saw as it has all the perfect features that allow you to perform all your professional and DIY tasks with ease and comfort.

Q: What is the difference between a reciprocating saw and the Sawzall?

A. They are almost the same. Sawzall is the brand name of the reciprocating saw.

Q. What is the best Sawzall?

A. Milwaukee Super Sawzall is the best Sawzall.

Q. Can I use a reciprocating saw to cut tree branches?

A. Yeah, you can use a reciprocating saw to cut tree branches as well as limbs. But it is recommended to cut only smaller trees using it.

Leave a Comment

Your email address will not be published.

NAVIGATE OUR BEST RECIPROCATING SAWS

  • Best Reciprocating Saws
  • What You Need
  • How To Choose
  • Standard Verses Compact
  • The Orbital Action
  • Speed Variability
  • Comfort
  • Blade & Stroke
  • Longevity of the Battery
  • Milwaukee Super Sawzall
  • Dewalt DCS367P1
  • Dewalt XTREME DCS312G1
  • Milwaukee Super Sawzall
  • DeWALT DCS367P1 Saws
  • DeWALT XTREME DCS367P1
  • Milwaukee M18 Hackzall
  • Milwaukee 6538-21
  • Makita 11 Amp JR3050T
  • BOSCH 12-Volt Max
  • Makita 12 Amp JR3051T
  • BLACK+DECKER BDCR20C