*As an Amazon Associate, this site earns from qualifying purchases. Learn More

Top 7 Best Sawzall Available in the market

Sawzall, what is it? The term is not common, no doubt. Milwaukee Tool Company developed the word Sawzall as a generic term for a reciprocating saw. Basically, it is the largest portable power tool you will ever use, and it serves a wide range of operations.

Sawzalls have blades attached to them that perform reciprocating cutting motions. Demolition and construction work often require reciprocating saws and the best Sawzall performs this work very well.

It is so versatile because there are multiple blade types for metals, wood, or both, and there are different types and sizes to fit your needs.

Table of Contents

#PreviewProductRating
1DEWALT DWE305, Corded Reciprocating Saw⭐⭐⭐⭐⭐
2MILWAUKEE’S 6538-21 Super Sawzall Reciprocating Saw⭐⭐⭐⭐
3DEWALT DWE304 Reciprocating Saw, 10-Amp⭐⭐⭐

1.1. Corded reciprocating saws: what are their benefits?

Using a corded reciprocating saw allows you to make more accurate cuts in less time. The majority of corded reciprocating saws are considered among the best Sawzalls as they come with more power and reliability, which makes them more efficient than cordless units.

Moreover, corded models do not experience power shortages. Additionally, corded reciprocating saws offer the following attributes;

  1. Ideal for making holes and slots in walls
  2. Contrary to other saws, they enable you to make cuts and curves in tight spots
  3. It is easy for them to make horizontal and vertical cuts
  4. A variety of speeds and orbital action make them versatile
  5. It is safe to use them single-handedly

Reciprocal saws, especially corded saws, offer more power to cut through most materials, including wood, steel, and metal. Corded reciprocating saws are preferred by most professionals. Cordless reciprocating saws, by comparison, offer low power but are easily portable and light in weight. Corded reciprocating saws are recommended if you are planning on working on time-consuming tasks.

1.2. Buying Guide for Reciprocating Saws

It would be easier for you to decide which reciprocating saw to pick with this buying guide. Considering the below-discussed factors you can easily decide which Sawzall suits your needs and would help you to get the work done.

Power

A saw’s motor is another important factor to consider. How much power does it produce? What is its speed capacity? When performing high-demanding tasks, you should opt for a motor that has at least 10 amps.

However, for a motor rated below 10 amps, a motor suitable for light DIY projects would be sufficient. Speed rating shouldn’t be overlooked as well. A high-demand project deserves a tool that strokes more than 3,000 times per minute. Sawzalls that are less than that are best suited to light projects.

Weigh/Construct

First and foremost, how is this saw constructed? How heavy is it? If you plan on using the device for a long time, it’s best to choose a lightweight device.

Ideally, it should not be too heavy. It shouldn’t be difficult to handle a saw that weighs no more than 8 lbs. In addition, the saw needs to be well-built. Choosing one that is easy to break would be a mistake. A Sawzall of metal construction is the best option.

Adjustable Speed Control

Does the saw have an adjustable speed? By using the variable speed trigger, this would be possible. This tool allows you to adjust the speed based on your project requirements. You must be able to access it with ease by having a slick design and a convenient placement for the trigger.

Length of Stroke

Cutting to a certain depth is determined by how long the blade strokes are. There is a wide range of reciprocating saw stroke lengths ranging between 1-1/8 and 1-1/4 inches.

A stroke length of this range would be appropriate if you are planning to make small or medium-sized cuts. When cutting thick materials, however, opt for stroke lengths between ¾ and 1-1/2 inches.

Ergonomics

A comfortable and easy-to-handle saw is what you need. Therefore, you must ensure that it is ergonomically sound. In addition to the saw itself, the handle should also be handy and comfortable. You should be able to comfortably hold the handle, as well as it being safe from heat and slipping.

Cut Types

Choose a reciprocating saw with different cut types if you want it to handle a variety of tasks. Based on your requirements, different types of cuts can be considered. Most affordable and less expensive models make linear cuts while others make orbital cuts.

The linear reciprocating saw will create a pull-push motion in a straight line. Material such as metal, wood, and plastic can be cut with this tool. In contrast, orbital reciprocating saws move in an almost circular fashion while cutting wood.

Cuts are made quickly and split periods are shortened. Additionally, during woodworking, it removes sawdust as well. Make your choice based on what is most appropriate for you.

Other Factors to Keep in Mind

Furthermore, ensure that it fits your hands well so there are no vibrations while you’re using it. Getting a sawzall that has a counterweight mechanism will ensure that minimal vibration will occur while using it. Choosing the right blade for the unit should also be an important consideration.

The one that best fits your needs is the one that you should pick. Remember to check the saw’s carry case, and it must have an LED light to highlight the cutting zone. In addition, if you get a saw with an automatic shutoff feature, you will be able to work with it in more confidence and comfort.

Our Top 3 Products

Every product has pros and cons, but there are certain ones that stand out from the competition. A good tool should have excellent price, ergonomics, user-friendliness, and performance. In order to take the following factors into consideration, we have selected 3 of the best products:

1.3. DEWALT DWE305, Corded Reciprocating Saw

A DeWalt power tool is known for its strength and reliability. Compared to other reciprocating saws, this reciprocating saw weighs 8.1lbs, which makes it lightweight. Additionally, it is durable and sturdy. A 12 amp motor powers this sawzall which has speeds ranging from 0 to 2,900 spm.

The stroke length is also quite good at 1-1/8 inch. You can control the unit’s speed easily with a variable speed trigger. Furthermore, the keyless blade clamp makes blade replacement easy.

Its rubber handle adds to its comfort and softness. As a result, you will have a much easier time controlling your saw while working on a project. And most of all, it’s available in an affordable price range with all these mentioned features which makes it a top choice among professionals and DIYers both.

1.4. MILWAUKEE’S 6538-21 Super Sawzall Reciprocating Saw

This is a powerful and lightweight reciprocating saw. The sawzall’s powerful 15 amp motor makes it an excellent option for woodworking. Due to its corded nature, it can easily handle your projects. It offers an excellent choice for extended projects in this regard.

Though it is not compact, its performance definitely stands out. Additionally, the device runs smoothly due to the counterbalanced mechanism. As a result, vibrations are reduced. Thus, it’s a good choice for professionals and DIYers alike and ranks 2nd in the list of our top products.

1.5. DEWALT DWE304 Reciprocating Saw, 10-Amp

Compared to other saws, this one has a lower price. This reciprocating saw is a good choice for DIYers. It is relatively lightweight, and its motor is good. The motor is powered by 10-amp. Blade speeds range from 0 to 2,800 SMP, which are reasonable speeds compared to other saws.

A 1-1/8-inch stroke length is offered by this saw. This allows you to finish your projects rapidly and efficiently. Additionally, it has a four-position blade clamp and is versatile. In addition, a keyless lever-action system makes it easy to change the blade.

Most importantly, variable speed triggers allow you to customize the speed for your project. Along with that, its moderate price makes it available for all users.

1.6. DEWALT DWE305, Corded Reciprocating Saw

Power tools made by DeWalt are renowned for their strength and reliability. However, this sawzall delivers amazingly well. This reciprocating saw weighs 8.1lbs, which makes it lightweight in comparison to other reciprocating saws. Furthermore, it is made to be sturdy and durable.

There are speeds of 0 to 2,900 spm with this sawzall powered by a 12 amp motor. Additionally, it offers a stroke length of 1-1/8 inch, which is pretty good.

A variable speed trigger controls the unit’s speed accordingly, allowing you to control it easily. As well as providing flush cutting, the saw features a 4-position blade clamp. Moreover, the blade clamp, which is a keyless design, allows for easy blade replacement.

This sawzall’s rubber handle makes it both soft and comfortable to hold. As a result, you will have a much easier time controlling your saw while working on a project. With this saw, you won’t have to worry about skin irritations.

Anybody looking for an easy to operate reciprocating saw should consider this model. It delivers as expected and generally has a user-friendly interface. Additionally, it is very reasonable in price.

Pros

  • Rubberized handles provide comfort and shock absorption
  • Speed riggers are included
  • Blade clamp with four positions to make flush cutting easy
  • With speeds ranging from 0 to 2900 spm
  • Changing blades is easy thanks to the keyless lever-action clamp

Cons

  • Carrying case not included
  • Some users may find it a bit heavy

1.7. MILWAUKEE’S 6538-21 Super Sawzall Reciprocating Saw

If you’re looking for a lighter yet powerful reciprocating saw, this is the model you’d want. Thanks to its 15 amp powerful motor, this sawzall can tackle almost any woodworking project. You should know that it has plenty of power to handle your projects since it is a corded unit.

There is no need to carry extra batteries with this one. In this regard, the product would be an excellent option for your extended projects.

Nevertheless, in terms of performance, it definitely stands out even though it is not classed as compact. Best of all, the counterbalanced mechanism ensures that the device runs smoothly. Vibrations are minimized when this happens.

This corded reciprocating saw has a high quality and can easily be considered the best. Woodworking projects of any magnitude can be handled by it. Thus, it’s a good choice for professionals and DIYers alike.

Pros

  • Design that is lightweight
  • Featuring an overload protection motor
  • Excellent cutting performance at constant speed
  • Excellent control due to minimal vibration
  • Comfortable and fatigue-reducing ergonomic design
  • Good cutting capacity

Cons

  • Has no fast-release cord
  • Instead of metal, it has a plastic shoe release lever

1.8. DEWALT DWE304 Reciprocating Saw, 10-Amp

The price of this saw is lower than most others. It is a good reciprocating saw for people who need one for DIY projects. Weighing somewhat less than eight pounds, it has a good motor as well. It is powered by a 10-amp motor.

The blade spins at speeds between 0 and 2,800 SMP, which is not a rapid speed in comparison to other saws. A 1-1/8-inch stroke length is offered by this saw. Consequently, you will be able to complete your projects rapidly and efficiently.

It also features a four-position blade clamp and can be used in a variety of ways. Its multipositional blades can be used for different purposes. Featuring a fixed shoe, this Dewalt reciprocating saw ensures extra durability when doing your work.

Also, the blade can be changed with a lever-action keyless system that takes very little effort. Most importantly, variable speed triggers allow you to customize the speed for your project.

You won’t be sorry if you choose this Dewalt Sawzall corded saw if you’re looking for a decent reciprocating saw for your DIY projects. Thanks to its low cost, it is very accessible.

Pros

  • Weighs relatively little
  • Extra-versatile blade clamp with four positions
  • Easily replaceable blades
  • Extra durability is provided by the rigid shoe
  • The price is very reasonable

Cons

  • High-demand projects are not supported
  • Long-term use may cause it to become hot

1.9. Milwaukee 6519- 31 Review- 12 Amp Corded

This Milwaukee reciprocating saw is the perfect instrument for those who want to have the best features combined with heavy-duty performance. When working with it, you are not exhausted due to the saw’s lightweight design, weighing only 7.1 pounds.

Featuring a heavy-duty and powerful 12-amp motor, the Milwaukee Professional Sawzall can handle even the toughest projects efficiently. 3,000 strokes per minute is the top speed of this motor.

This model features a quick-lock system that allows blades to be attached and removed without tools. A counterweight mechanism is also included with the saw that reduces vibration while using it. Integrated in the clutch is a mechanism that prolongs the service life of the internal components.

The motor is also safeguarded in this way. An impact-resistant polyurethane case simplifies transport and storage. As a matter of fact, this saw is equipped with a 1-1/8-inch stroke length capacity.

Pros

  • Reciprocating saw with the best price
  • Perfect for the most demanding applications
  • Speeds up to 3,000 SPM
  • An anti-vibration counterweight reduces hand discomfort
  • There is a carrying case for it
  • The clutch is internally mounted to prevent friction

Cons

  • There are no extra blades included with the saw
  • Unlike other units, it's not the lightest one available

1.10. Makita JR3070CT Orbital 15-Amp Reciprocating Saw

No vibrations are felt during operation when you use this Matika Reciprocating Saw. The saw weighs 10.14 pounds, which makes it a bit heavier than other saws. However, that means it won’t break down too frequently, so you can rest assured that it won’t malfunction.

Furthermore, the machine is powered by a 15 amp motor. There is a speed range between 0 and 2,800 SPM for this motor.

For those of you working on demanding projects, there can be an electronic speed controller that will keep the speed constant. To avoid gear damage, there is an internal clutch that prevents the blade from accidentally binding.

Additionally, this comes with a 4-position straight/orbital cutting action so that you can handle multiple tasks at once. The saw’s stroke length is 1-1/4″. Probably the best feature is the anti-vibration system, which minimizes vibration by twice compared to reciprocating saws of the same caliber. Moreover, changing the blades requires no tools.

When it comes to cutting projects requiring high levels of productivity, this reciprocating saw is a great choice. We consider it useful and worth its price, even though it is not the cheapest reciprocating saw in terms of cost.

Pros

  • Carrying case is included
  • Contains a lock-on, large trigger for added convenience
  • Fast cutting with long strokes
  • Operationally and aesthetically simple
  • Vibration-resistant saw with powerful motor
  • The rubberized handle provides an ergonomic design
  • Eliminates wear and tear with an integrated clutch

Cons

  • The cost is rather high
  • It's big and heavy

1.11. SKIL 9206-02 – 7.5-Amp Variable Speed Reciprocating Saw

There are occasions when you need only a small reciprocating saw for smaller jobs around the home. This is a good model if you fall into that category. In terms of weight, this saw weighs only 2.81lbs, making it the lightest among all the mentioned products.

As a result, you will not be overtired when using this SKIL tool. With a power of 7.5 amps, the saw is able to handle small projects around the house.

This gearbox features a rugged metal housing offering exceptional durability and toughness. The small size may seem inconsequential, but the heavy materials will bring about long-term durability.

With this saw, you get to control vibrations better thanks to the amazing counterbalance system. A tool isn’t necessary for this one to change its blade. The base of the saw pivots for added stability when working with hard materials.

With this one, there’s a speed trigger so that you can adjust the speed with ease. If you are a DIYer doing small jobs, this would be a good choice.

Pros

  • Durable metal construction
  • Vibrations are reduced by counterbalancing
  • Compact and lightweight
  • Saw is very reasonably priced
  • It features a pivoting foot for added stability

Cons

  • Probably not the best choice for a high-end task
  • Blades are not included

1.12. Hitachi CR13VBY 12-Amp Reciprocating Saw

In spite of being the last product on the list, the Hitachi Sawzall corded delivers excellent performance. When it comes to a powerful saw to take care of your project, this one is one of the best to consider. Weighing in at 9.7 lbs, this saw is the heaviest on this list.

A 12 amp motor is also included with the saw. It’s capable of speed ranges between 0 and 3,000 spm. You can expect a saw that can handle the most demanding projects with ease.

Furthermore, the saw has a technology that reduces vibrations, User Vibration Protection (UVP). The cutting mechanism is dual-mode. This means that you can switch between swing mode and straight mode.

With this one, you can work on your project comfortably thanks to the ergonomic design. Furthermore, the product features an easy-to-hold, slip-and-heat-resistant handle. Those with highly sought-after projects, such as contractors or woodworkers, would benefit greatly from this.

Pros

  • The device is sealed three times against dust and debris
  • Grip that is heat and slip resistant and ergonomically designed
  • It has a dial and trigger for adjusting cutting speed
  • Motor with great power
  • Cutting mechanism with two modes aimed at reducing rebound effect
  • Counterweight mechanism reduces vibrations while working

Cons

  • The saw is heavier than most saws
  • It would be useful to have a longer cord

FAQ

Q: What is the best Sawzall on the market?

A: DEWALT DWE305, Corded Reciprocating Saw is the best Sawzall on the market.

Q: What is the difference between the Sawzall and a reciprocating saw?

A: This reciprocating saw brand is Sawzall. During the 1950s, Milwaukee, a leading manufacturer of power tools, registered the name Sawzall. Eventually, every reciprocating saw came to be known as Sawzall since it became so popular.

Q: Which Milwaukee Sawzall is best?

A: MILWAUKEE’S 6538-21 Super Sawzall Reciprocating Saw is the best.

Leave a Comment

Your email address will not be published. Required fields are marked *

NAVIGATE OUR BEST SAWZALL

  • Best Sawzall
  • Corded Reciprocating
  • Buying Guide
  • Dewalt DWE305
  • Milwaukee's 6538-21
  • Dewalt DWE304
  • Dewalt DWE305 Corded
  • Milwaukee's 6538-21 Saw
  • Dewalt DWE304 10-amp
  • Milwaukee 6519-31
  • Makita JR3070CT
  • Skil 9206-02
  • Hitachi CR13VBY

Top 7 Best Sawzall Available in the market

Sawzall, what is it? The term is not common, no doubt. Milwaukee Tool Company developed the word Sawzall as a generic term for a reciprocating saw. Basically, it is the largest portable power tool you will ever use, and it serves a wide range of operations.

Sawzalls have blades attached to them that perform reciprocating cutting motions. Demolition and construction work often require reciprocating saws and the best Sawzall performs this work very well.

It is so versatile because there are multiple blade types for metals, wood, or both, and there are different types and sizes to fit your needs.

Table of Contents

BEST CHOICE
DEWALT DWE305, Corded Reciprocating Saw
⭐⭐⭐⭐⭐
PREMIUM PICK
MILWAUKEE’S 6538-21 Super Sawzall Reciprocating Saw
⭐⭐⭐⭐
BEST VALUE
DEWALT DWE304 Reciprocating Saw, 10-Amp
⭐⭐⭐

1.1. Corded reciprocating saws: what are their benefits?

Using a corded reciprocating saw allows you to make more accurate cuts in less time. The majority of corded reciprocating saws are considered among the best Sawzalls as they come with more power and reliability, which makes them more efficient than cordless units.

Moreover, corded models do not experience power shortages. Additionally, corded reciprocating saws offer the following attributes;

  1. Ideal for making holes and slots in walls
  2. Contrary to other saws, they enable you to make cuts and curves in tight spots
  3. It is easy for them to make horizontal and vertical cuts
  4. A variety of speeds and orbital action make them versatile
  5. It is safe to use them single-handedly

Reciprocal saws, especially corded saws, offer more power to cut through most materials, including wood, steel, and metal. Corded reciprocating saws are preferred by most professionals. Cordless reciprocating saws, by comparison, offer low power but are easily portable and light in weight. Corded reciprocating saws are recommended if you are planning on working on time-consuming tasks.

1.2. Buying Guide for Reciprocating Saws

It would be easier for you to decide which reciprocating saw to pick with this buying guide. Considering the below-discussed factors you can easily decide which Sawzall suits your needs and would help you to get the work done.

Power

A saw’s motor is another important factor to consider. How much power does it produce? What is its speed capacity? When performing high-demanding tasks, you should opt for a motor that has at least 10 amps.

However, for a motor rated below 10 amps, a motor suitable for light DIY projects would be sufficient. Speed rating shouldn’t be overlooked as well. A high-demand project deserves a tool that strokes more than 3,000 times per minute. Sawzalls that are less than that are best suited to light projects.

Weigh/Construct

First and foremost, how is this saw constructed? How heavy is it? If you plan on using the device for a long time, it’s best to choose a lightweight device.

Ideally, it should not be too heavy. It shouldn’t be difficult to handle a saw that weighs no more than 8 lbs. In addition, the saw needs to be well-built. Choosing one that is easy to break would be a mistake. A Sawzall of metal construction is the best option.

Adjustable Speed Control

Does the saw have an adjustable speed? By using the variable speed trigger, this would be possible. This tool allows you to adjust the speed based on your project requirements. You must be able to access it with ease by having a slick design and a convenient placement for the trigger.

Length of Stroke

Cutting to a certain depth is determined by how long the blade strokes are. There is a wide range of reciprocating saw stroke lengths ranging between 1-1/8 and 1-1/4 inches.

A stroke length of this range would be appropriate if you are planning to make small or medium-sized cuts. When cutting thick materials, however, opt for stroke lengths between ¾ and 1-1/2 inches.

Ergonomics

A comfortable and easy-to-handle saw is what you need. Therefore, you must ensure that it is ergonomically sound. In addition to the saw itself, the handle should also be handy and comfortable. You should be able to comfortably hold the handle, as well as it being safe from heat and slipping.

Cut Types

Choose a reciprocating saw with different cut types if you want it to handle a variety of tasks. Based on your requirements, different types of cuts can be considered. Most affordable and less expensive models make linear cuts while others make orbital cuts.

The linear reciprocating saw will create a pull-push motion in a straight line. Material such as metal, wood, and plastic can be cut with this tool. In contrast, orbital reciprocating saws move in an almost circular fashion while cutting wood.

Cuts are made quickly and split periods are shortened. Additionally, during woodworking, it removes sawdust as well. Make your choice based on what is most appropriate for you.

Other Factors to Keep in Mind

Furthermore, ensure that it fits your hands well so there are no vibrations while you’re using it. Getting a sawzall that has a counterweight mechanism will ensure that minimal vibration will occur while using it. Choosing the right blade for the unit should also be an important consideration.

The one that best fits your needs is the one that you should pick. Remember to check the saw’s carry case, and it must have an LED light to highlight the cutting zone. In addition, if you get a saw with an automatic shutoff feature, you will be able to work with it in more confidence and comfort.

Our Top 3 Products

Every product has pros and cons, but there are certain ones that stand out from the competition. A good tool should have excellent price, ergonomics, user-friendliness, and performance. In order to take the following factors into consideration, we have selected 3 of the best products:

1.3. DEWALT DWE305, Corded Reciprocating Saw

A DeWalt power tool is known for its strength and reliability. Compared to other reciprocating saws, this reciprocating saw weighs 8.1lbs, which makes it lightweight. Additionally, it is durable and sturdy. A 12 amp motor powers this sawzall which has speeds ranging from 0 to 2,900 spm.

The stroke length is also quite good at 1-1/8 inch. You can control the unit’s speed easily with a variable speed trigger. Furthermore, the keyless blade clamp makes blade replacement easy.

Its rubber handle adds to its comfort and softness. As a result, you will have a much easier time controlling your saw while working on a project. And most of all, it’s available in an affordable price range with all these mentioned features which makes it a top choice among professionals and DIYers both.

1.4. MILWAUKEE’S 6538-21 Super Sawzall Reciprocating Saw

This is a powerful and lightweight reciprocating saw. The sawzall’s powerful 15 amp motor makes it an excellent option for woodworking. Due to its corded nature, it can easily handle your projects. It offers an excellent choice for extended projects in this regard.

Though it is not compact, its performance definitely stands out. Additionally, the device runs smoothly due to the counterbalanced mechanism. As a result, vibrations are reduced. Thus, it’s a good choice for professionals and DIYers alike and ranks 2nd in the list of our top products.

1.5. DEWALT DWE304 Reciprocating Saw, 10-Amp

Compared to other saws, this one has a lower price. This reciprocating saw is a good choice for DIYers. It is relatively lightweight, and its motor is good. The motor is powered by 10-amp. Blade speeds range from 0 to 2,800 SMP, which are reasonable speeds compared to other saws.

A 1-1/8-inch stroke length is offered by this saw. This allows you to finish your projects rapidly and efficiently. Additionally, it has a four-position blade clamp and is versatile. In addition, a keyless lever-action system makes it easy to change the blade.

Most importantly, variable speed triggers allow you to customize the speed for your project. Along with that, its moderate price makes it available for all users.

1.6. DEWALT DWE305, Corded Reciprocating Saw

Power tools made by DeWalt are renowned for their strength and reliability. However, this sawzall delivers amazingly well. This reciprocating saw weighs 8.1lbs, which makes it lightweight in comparison to other reciprocating saws. Furthermore, it is made to be sturdy and durable.

There are speeds of 0 to 2,900 spm with this sawzall powered by a 12 amp motor. Additionally, it offers a stroke length of 1-1/8 inch, which is pretty good.

A variable speed trigger controls the unit’s speed accordingly, allowing you to control it easily. As well as providing flush cutting, the saw features a 4-position blade clamp. Moreover, the blade clamp, which is a keyless design, allows for easy blade replacement.

This sawzall’s rubber handle makes it both soft and comfortable to hold. As a result, you will have a much easier time controlling your saw while working on a project. With this saw, you won’t have to worry about skin irritations.

Anybody looking for an easy to operate reciprocating saw should consider this model. It delivers as expected and generally has a user-friendly interface. Additionally, it is very reasonable in price.

Pros

  • Rubberized handles provide comfort and shock absorption
  • Speed riggers are included
  • Blade clamp with four positions to make flush cutting easy
  • With speeds ranging from 0 to 2900 spm
  • Changing blades is easy thanks to the keyless lever-action clamp

Cons

  • Carrying case not included
  • Some users may find it a bit heavy

1.7. MILWAUKEE’S 6538-21 Super Sawzall Reciprocating Saw

If you’re looking for a lighter yet powerful reciprocating saw, this is the model you’d want. Thanks to its 15 amp powerful motor, this sawzall can tackle almost any woodworking project. You should know that it has plenty of power to handle your projects since it is a corded unit.

There is no need to carry extra batteries with this one. In this regard, the product would be an excellent option for your extended projects.

Nevertheless, in terms of performance, it definitely stands out even though it is not classed as compact. Best of all, the counterbalanced mechanism ensures that the device runs smoothly. Vibrations are minimized when this happens.

This corded reciprocating saw has a high quality and can easily be considered the best. Woodworking projects of any magnitude can be handled by it. Thus, it’s a good choice for professionals and DIYers alike.

Pros

  • Design that is lightweight
  • Featuring an overload protection motor
  • Excellent cutting performance at constant speed
  • Excellent control due to minimal vibration
  • Comfortable and fatigue-reducing ergonomic design
  • Good cutting capacity

Cons

  • Has no fast-release cord
  • Instead of metal, it has a plastic shoe release lever

1.8. DEWALT DWE304 Reciprocating Saw, 10-Amp

The price of this saw is lower than most others. It is a good reciprocating saw for people who need one for DIY projects. Weighing somewhat less than eight pounds, it has a good motor as well. It is powered by a 10-amp motor.

The blade spins at speeds between 0 and 2,800 SMP, which is not a rapid speed in comparison to other saws. A 1-1/8-inch stroke length is offered by this saw. Consequently, you will be able to complete your projects rapidly and efficiently.

It also features a four-position blade clamp and can be used in a variety of ways. Its multipositional blades can be used for different purposes. Featuring a fixed shoe, this Dewalt reciprocating saw ensures extra durability when doing your work.

Also, the blade can be changed with a lever-action keyless system that takes very little effort. Most importantly, variable speed triggers allow you to customize the speed for your project.

You won’t be sorry if you choose this Dewalt Sawzall corded saw if you’re looking for a decent reciprocating saw for your DIY projects. Thanks to its low cost, it is very accessible.

Pros

  • Weighs relatively little
  • Extra-versatile blade clamp with four positions
  • Easily replaceable blades
  • Extra durability is provided by the rigid shoe
  • The price is very reasonable

Cons

  • High-demand projects are not supported
  • Long-term use may cause it to become hot

1.9. Milwaukee 6519- 31 Review- 12 Amp Corded

This Milwaukee reciprocating saw is the perfect instrument for those who want to have the best features combined with heavy-duty performance. When working with it, you are not exhausted due to the saw’s lightweight design, weighing only 7.1 pounds.

Featuring a heavy-duty and powerful 12-amp motor, the Milwaukee Professional Sawzall can handle even the toughest projects efficiently. 3,000 strokes per minute is the top speed of this motor.

This model features a quick-lock system that allows blades to be attached and removed without tools. A counterweight mechanism is also included with the saw that reduces vibration while using it. Integrated in the clutch is a mechanism that prolongs the service life of the internal components.

The motor is also safeguarded in this way. An impact-resistant polyurethane case simplifies transport and storage. As a matter of fact, this saw is equipped with a 1-1/8-inch stroke length capacity.

Pros

  • Reciprocating saw with the best price
  • Perfect for the most demanding applications
  • Speeds up to 3,000 SPM
  • An anti-vibration counterweight reduces hand discomfort
  • There is a carrying case for it
  • The clutch is internally mounted to prevent friction

Cons

  • There are no extra blades included with the saw
  • Unlike other units, it's not the lightest one available

1.10. Makita JR3070CT Orbital 15-Amp Reciprocating Saw

No vibrations are felt during operation when you use this Matika Reciprocating Saw. The saw weighs 10.14 pounds, which makes it a bit heavier than other saws. However, that means it won’t break down too frequently, so you can rest assured that it won’t malfunction.

Furthermore, the machine is powered by a 15 amp motor. There is a speed range between 0 and 2,800 SPM for this motor.

For those of you working on demanding projects, there can be an electronic speed controller that will keep the speed constant. To avoid gear damage, there is an internal clutch that prevents the blade from accidentally binding.

Additionally, this comes with a 4-position straight/orbital cutting action so that you can handle multiple tasks at once. The saw’s stroke length is 1-1/4″. Probably the best feature is the anti-vibration system, which minimizes vibration by twice compared to reciprocating saws of the same caliber. Moreover, changing the blades requires no tools.

When it comes to cutting projects requiring high levels of productivity, this reciprocating saw is a great choice. We consider it useful and worth its price, even though it is not the cheapest reciprocating saw in terms of cost.

Pros

  • Carrying case is included
  • Contains a lock-on, large trigger for added convenience
  • Fast cutting with long strokes
  • Operationally and aesthetically simple
  • Vibration-resistant saw with powerful motor
  • The rubberized handle provides an ergonomic design
  • Eliminates wear and tear with an integrated clutch

Cons

  • The cost is rather high
  • It's big and heavy

1.11. SKIL 9206-02 – 7.5-Amp Variable Speed Reciprocating Saw

There are occasions when you need only a small reciprocating saw for smaller jobs around the home. This is a good model if you fall into that category. In terms of weight, this saw weighs only 2.81lbs, making it the lightest among all the mentioned products.

As a result, you will not be overtired when using this SKIL tool. With a power of 7.5 amps, the saw is able to handle small projects around the house.

This gearbox features a rugged metal housing offering exceptional durability and toughness. The small size may seem inconsequential, but the heavy materials will bring about long-term durability.

With this saw, you get to control vibrations better thanks to the amazing counterbalance system. A tool isn’t necessary for this one to change its blade. The base of the saw pivots for added stability when working with hard materials.

With this one, there’s a speed trigger so that you can adjust the speed with ease. If you are a DIYer doing small jobs, this would be a good choice.

Pros

  • Durable metal construction
  • Vibrations are reduced by counterbalancing
  • Compact and lightweight
  • Saw is very reasonably priced
  • It features a pivoting foot for added stability

Cons

  • Probably not the best choice for a high-end task
  • Blades are not included

1.12. Hitachi CR13VBY 12-Amp Reciprocating Saw

In spite of being the last product on the list, the Hitachi Sawzall corded delivers excellent performance. When it comes to a powerful saw to take care of your project, this one is one of the best to consider. Weighing in at 9.7 lbs, this saw is the heaviest on this list.

A 12 amp motor is also included with the saw. It’s capable of speed ranges between 0 and 3,000 spm. You can expect a saw that can handle the most demanding projects with ease.

Furthermore, the saw has a technology that reduces vibrations, User Vibration Protection (UVP). The cutting mechanism is dual-mode. This means that you can switch between swing mode and straight mode.

With this one, you can work on your project comfortably thanks to the ergonomic design. Furthermore, the product features an easy-to-hold, slip-and-heat-resistant handle. Those with highly sought-after projects, such as contractors or woodworkers, would benefit greatly from this.

Pros

  • The device is sealed three times against dust and debris
  • Grip that is heat and slip resistant and ergonomically designed
  • It has a dial and trigger for adjusting cutting speed
  • Motor with great power
  • Cutting mechanism with two modes aimed at reducing rebound effect
  • Counterweight mechanism reduces vibrations while working

Cons

  • The saw is heavier than most saws
  • It would be useful to have a longer cord

FAQ

Q: What is the best Sawzall on the market?

A: DEWALT DWE305, Corded Reciprocating Saw is the best Sawzall on the market.

Q: What is the difference between the Sawzall and a reciprocating saw?

A: This reciprocating saw brand is Sawzall. During the 1950s, Milwaukee, a leading manufacturer of power tools, registered the name Sawzall. Eventually, every reciprocating saw came to be known as Sawzall since it became so popular.

Q: Which Milwaukee Sawzall is best?

A: MILWAUKEE’S 6538-21 Super Sawzall Reciprocating Saw is the best.

Leave a Comment

Your email address will not be published. Required fields are marked *